Dell OptiPlex 5050 Owner'S Manual Download Page 4

Page: 4 / 68

Removing processor.................................................................................................................................................. 22
Installing the processor..............................................................................................................................................23

Memory module............................................................................................................................................................... 24

Removing memory module....................................................................................................................................... 24
Installing the memory module...................................................................................................................................24

SD card reader..................................................................................................................................................................24

Removing the SD card reader.................................................................................................................................. 24
Installing the SD card reader.....................................................................................................................................25

Power supply unit............................................................................................................................................................ 25

Removing power supply unit (PSU)........................................................................................................................ 25
Installing the power supply unit (PSU)....................................................................................................................28

Power switch....................................................................................................................................................................28

Removing power switch............................................................................................................................................28
Installing the power switch....................................................................................................................................... 29

System board................................................................................................................................................................... 30

Removing system board............................................................................................................................................30
Installing the system board....................................................................................................................................... 33
System board layout.................................................................................................................................................. 34

3 M.2 Intel Optane Memory Module 16 GB..................................................................................................... 35

4 Technology and components........................................................................................................................ 41

USB features..................................................................................................................................................................... 41

HDMI 1.4............................................................................................................................................................................43

HDMI 1.4 Features......................................................................................................................................................43
Advantages of HDMI................................................................................................................................................. 43

5 System setup...............................................................................................................................................45

Assigning a system password and setup password...............................................................................................46
Deleting or changing an existing system and/or setup password........................................................................47

Contents

Summary of Contents for OptiPlex 5050





































































Search results

Summary of Contents for OptiPlex 5050

Reviews:

Related manuals for OptiPlex 5050

Brands by name

Popular brands

Dell OptiPlex 5050, Owner'S Manual

Search results

Summary of Contents for OptiPlex 5050

Reviews:

Related manuals for OptiPlex 5050

Brands by name

Popular brands