3
To remove the heat sink assembly:
a Disconnect the heat sink assembly cable from the system board [1].
b Loosen the captive screws that secure the heat sink assembly [2] and lift it away from the computer [3].
Installing the heat sink assembly
1
Place the heat sink assembly onto the processor.
2
Tighten the captive screws to secure the heat sink assembly to the system board.
3
Connect the heat sink assembly cable to the system board.
4
Install the:
a
b
c
d
5
Follow the procedure in
After working inside your computer
.
Processor
Removing processor
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
22
Removing and installing components
