Dell OptiPlex 5050, Owner'S Manual, Page: 13 / 68

Installing the bezel
1 Insert the tabs on the bezel into the slots on the computer.
2 Press the bezel until the tabs clicks into place.
3 Install the cover .
4 Follow the procedure in After working inside your computer
Speaker
Removing speaker
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a cover
b bezel
c 2.5–inch drive assembly
d optical drive
3 To remove the speaker:
a Disconnect the speaker cable from the system board [1].
b Press the release tabs and pull the speaker out from the computer [2] [3].
Removing and installing components 13