Dell OptiPlex 330, Service Manual

Page: 60 / 170

60
System Memor y
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
I n s t a l l i n g a M e m o r y M o d u l e
2
Rotate the power supply back into position until the securing tab
snaps into the release latch.
3
If you have a mini tower chassis, stand the computer upright.
4
Replace the computer cover and restart the system .
The system detects that the new memory does not match the existing
system configuration information and generates the following
message:
The amount of system memory has changed.
Strike the F1 key to continue, F2 to run the setup
utility
5
Enter system setup, and check the value for System Memory . The
system should have already changed the value of System Memory to
reflect the newly installed memory. If the new total is correct, skip to
step 7 .
6
If the memory total is incorrect, repeat step 1 and step 3 of " Removing
a Memory Module ." Check the installed modules to ensure that they
are seated properly in their sockets. Then repeat step 2 through step 5
of this procedure.
7
When the System Memory total is correct, exit system setup.
slots (2)
securing clips (2)