Dell OptiPlex 330, Service Manual

Page: 17 / 170

Computer Cover
17
Re m o v i n g t h e C o v e r ( D e s k t o p C h a s s i s )
c
Lift the cover away from the chassis.
Replacing the Computer Cover (Desktop Chassis)
1
Check all cable connections and fold cables out of the way so that they
do not catch on the computer cover. Ensure that cables are not routed
over the drive cage—they will prevent the cover from closing properly.
2
Ensure that no tools or extra parts (including screws) are left inside the
computer chassis.
3
Replace the computer cover.
a
Hold the cover at a slight angle as shown in the following figure.
b
Fit the three cover hooks into the recessed slots at the bottom of
chassis. (It might be helpful to look down into the chassis to verify
that the hooks are in place.)
c
Rotate the cover downward and into position. Ensure that the two
cover release buttons click into place.
D
cover release buttons (2)
padlock ring