Dell OptiPlex 3050 Owner'S Manual Download Page 56

Page: 56 / 66

Option

Description

•

Bluetooth

Table 17. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. This option is not set
by default.

SERR Messages

This field controls the SERR message mechanism. Some graphic card required the SERR
message.

•

Enable SERR Messages (default)

BIOS Downgrade

This field controls flashing of the system firmware to pervious revisions.
Allows BIOS Downgrade (Enabled)

Data Wipe

This field enables user to erase data from all internal storage device.

BIOS Recovery

Allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key. Enabled by default.

Table 18. System Logs

Option

Description

BIOS Events

Allows you to view and clear the System Setup (BIOS) POST events.

Table 19. SupportAssist System Resolution

Option

Description

Auto OS Recovery Threshold

Allows you to control the automatic boot flow for SupportAssist System. Options are:

•

Off

•

2 (Enabled)

•

System setup

Summary of Contents for OptiPlex 3050



































































Search results

Summary of Contents for OptiPlex 3050

Reviews:

Related manuals for OptiPlex 3050

Brands by name

Popular brands

Dell OptiPlex 3050, Owner'S Manual

Search results

Summary of Contents for OptiPlex 3050

Reviews:

Related manuals for OptiPlex 3050

Brands by name

Popular brands