manualshive.com logo in svg

Dell OptiPlex 3050, Owner'S Manual, Page: 50 / 66

Share
Download
Dell OptiPlex 3050 Owner'S Manual Download Page 50

Option

Description

•

SATA-0: (Enabled by default)

•

SATA-1: (Enabled by default)

•

M.2 PCIe SSD-0: (Enabled by default)

SMART Reporting

This field controls whether hard drive errors for integrated drives are reported during system 
startup. This technology is part of the SMART (Self-Monitoring Analysis and Reporting 
Technology) specification.

•

Enable SMART Reporting (Disabled by default)

USB Configuration

This field configures the integrated USB controller. If Boot Support is enabled, the system is 
allowed to boot any type of USB Mass Storage Devices (HDD, memory key, floppy).
If USB port is enabled, device attached to this port is enabled and available for OS.

If USB port is disabled, the OS cannot see any device attached to this port.

•

Enable Boot Support

•

Enable Side USB Ports

•

Enable Rear USB Ports

NOTE: 

USB keyboard and mouse always work in the BIOS setup irrespective of these 

settings.

Rear USB Configuration

This field enables or disables the rear USB configuration

•

Left*

•

Center Right

•

Center Left*

•

Right

NOTE: 

*Left port denotes a USB 3.1 Gen 1 capable port.

Side USB Configuration

This field enables or disables the side USB configuration

•

Side Port 1 (Top)*

•

Side Port 2 (Bottom)*

NOTE: 

*Side Port 1 (Top) port denotes a USB 3.1 Gen 1 capable port.

USB PowerShare

Allows you to configures the USB PowerShare feature behavior.

•

Enable USB PowerShare (Disabled)

Audio

This field enables or disables the integrated audio controller. By default, the 

Enable Audio

 option 

is selected. The options are:

•

Enable Microphone

•

Enable Internal Speaker

OSB Button Management

This field allows the user to disable the OSB (On-Screen Display) buttons on their AIO.

•

Disabled OSD Buttons (Disabled)

Touchscreen

This field controls whether the touchscreen is enabled or disabled.

•

Touchscreen (Enabled)

Miscellaneous Devices

Allows you to enable or disable the following devices:

•

Enable Camera (Enabled)

•

Enabled Secure Digital (SD) Card (Enabled)

50

System setup

Summary of Contents for OptiPlex 3050



































































Reviews:

No comments