Dell OPTI PLEX GX1, Service Manual

Page: 159 / 178

Removing and Replacing Parts on the OptiPlex NX1 Net PC Chassis 7-15
6. Enter the System Setup program, and confirm that 8 MB is shown in the
Video Memory option. If the total memory is listed incorrectly, repeat
steps 1 through 6 to reseat the video-memory upgrade module and verify
that the computer acknowledges the module.
7. Run the system diagnostics (Video Test Group) to test the new video-mem-
ory upgrade module.
0LFURSURFHVVRU
To take advantage of future options in processor speed and functionality, you
can replace the microprocessor on your system board with any Dell-supported
microprocessor upgrade. The microprocessor upgrade kit is shipped with a
single-edge contact (SEC) cartridge/heat sink assembly which includes the
microprocessor, microprocessor heat sink, and L2-cache memory module.
You may also have to reseat or replace an SEC cartridge/heat sink assembly
during normal maintenance.
6(&&DHDW6LQN$VVHPEO\
)LJXUH6(&&DHDW6LQN5HPRYDO
SEC cartridge
release latches (2)
heat sink
SEC
cartridge
guide bracket
assembly
metal
standoffs (2)
heat sink
clips (2)