Dell OPTI PLEX GX1, Service Manual

Page: 90 / 178

4-18
'HOO2SWL3OH[*;*;S0DQDJHG3&DQG2SWL3OH[1;1HW3&6\VWHPV6HUYLFH0DQXDO
9LGHR0HPRU\
)LJXUH,QVWDOOLQJD9LGHR0HPRU\8SJUDGH0RGXOH
You can upgrade video memory from 4 to 8 MB by installing a video-memory
upgrade module in the video-memory upgrade socket on the system board.
Adding additional video memory increases the system’s video performance
and provides additional modes for high-resolution/expanded color applications.
To install the video memory upgrade, follow these steps:
1. Remove the expansion-card cage.
&$87,217RDYRLGSRVVLEOHGDPDJHWRWKHYLGHRPHPRU\
XSJUDGHVRFNHWDQGRUYLGHRPHPRU\XSJUDGHPRGXOHWKH
PRGXOHLVNH\HGDQGPXVWEHFRUUHFWO\SRVLWLRQHGEHIRUH
LQVHUWLQJLWLQWRWKHVRFNHW
2. Orient the video-memory upgrade module as shown in Figure 4-17. Then
carefully align the module’s edge connector pins with the socket ensuring
that the slot in the module mates with the socket key.
3. Press the video-memory upgrade module firmly into the socket, and pivot
the module downward until the module clicks into place.
NOTE: If you do not hear a sharp click when installing the video-memory
upgrade module, remove the module and repeat steps 2 and 3.
4. Replace the expansion-card cage.
5. Replace the computer cover, and reconnect the AC power cable to the
electrical outlet. Press the power button on the computer to reboot the
system.
NOTE: As the system boots, it automatically detects the presence of the
new video-memory upgrade module and automatically changes the sys-
tem configuration information in the System Setup program.
video-memory
upgrade socket
video-memory
upgrade module
notch