43
| Configuring L2 Bridge Mode
Configuring L2 Bridge Mode
This section provides instructions to configure the Dell
SonicWALL NSA E8500 appliance in tandem with an existing
Internet gateway device. This section is relevant to users
following deployment
scenario
C
.
This section contains the following sub-sections:
•
Connection Overview
- page 43
•
Configuring the Primary Bridge Interface
- page 43
•
Configuring the Secondary Bridge Interface
- page 44
Connection Overview
Connect the X1 port on your Dell SonicWALL NSA E8500 to the
LAN port on your existing Internet gateway device. Then
connect the X0 port on your NSA E8500 to your LAN resources.
Configuring the Primary Bridge Interface
The primary bridge interface is your existing Internet gateway
device. The only step involved in setting up your primary bridge
interface is to ensure that the WAN interface is configured for a
static IP address. You will need this static IP address when
configuring the secondary bridge.
Note:
The primary bridge interface must have a static IP
assignment.
E8500
Network Security Appliance
SonicWALL NSA E-Class
Network Gateway
L2 Bridge Link
Network Resources
X1
LAN
X0
Internet or
LAN Segment 2
Summary of Contents for NSA E8500
