Dell Latitude LT System User Manual Download Page 41 | Manualshive

Page: 41 / 115

Dell Latitude LT System User Manual Download Page 41

Battery and Power Management

3-5

Optional External Battery Pack

You can use an optional external battery pack to power your computer for longer
periods of time.

Use only the appropriate optional external battery pack, and attach it
correctly.

Connecting External Battery Pack

1.

Slide the cover of the external battery port to locate the port.

2.

Connect the optional battery by matching the projections on either side of the
battery to the notched parts of the computer. Make sure that the battery
connector lines up with the external battery port of the computer. If you hear a
clicking sound, the external battery pack is correctly connected.

•

While the external battery pack is connected, do not carry the
computer by holding the computer only. Firmly hold both the
computer and the external battery pack.

•

You cannot connect an external monitor when the external battery
pack is connected.

«
...
39
40
41
42
43
...
»

Summary of Contents for Latitude LT System




















































































































Reviews:

No comments