Option
Description
• Wake on AC
Auto On Time
Allows you to set the time at which the computer must turn on
automatically. The options are:
•
Disabled
(Default Setting)
• Every Day
• Weekdays
• Select Days
USB Wake Support
Allows you to enable the USB devices to wake the computer from
standby mode. The option is disabled
• Enable USB Wake Support
Wireless Radio Control
Allows you to control the WLAN and WWAN radio. The options are:
• Control WLAN radio
• Control WWAN radio
Default Setting: both the options are disabled.
Wake on LAN/WLAN
This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply.
•
Disabled
- Does not allow the system to power on by special LAN
signals when it receives a wake-up signal from the LAN or wireless
LAN. (Default Setting)
• LAN Only - Allows the system to be powered on by special LAN
signals.
• WLAN Only
• LAN or WLAN
Block Sleep
Allows you to block the computer from entering into the sleep state.
Option is disabled by default.
• Block Sleep (S3)
Peak Shift
Peak Shift can be used to minimize AC consumption during peak powers
times of day. Set the start and end time to run in Peak Shift mode.
•
Enable Peak Shift
(Disabled)
Advanced Battery Charge
Configuration
Allows batteries in the system in Advanced Battery Charge Mode to
maximize battery health. This uses standard charging algorithm and
other techniques during non-work hours to maximize battery health
•
Enable Advanced Battery Charge Mode
(Disabled)
Primary Battery
Configuration
Allows you to define how to use the battery charge, when AC is plugged
in. The options are:
•
Adaptive
(Enabled)
• Standard Charge
• Express Charge
42