Installing the Keyboard
1.
Align the keyboard to its slot.
2.
Tighten the screws to secure the keyboard on the palmrest.
3.
Connect the keyboard-backlight cable to the computer.
4.
Install
a.
keyboard trim
b.
base cover
c.
battery
.
5.
Follow the procedures in
After Working Inside Your computer
Removing the Palmrest
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove .
a.
battery
b.
base cover
c.
keyboard trim
d.
keyboard
3.
Remove the screws that secure the palmrest assembly to the computer.
4.
Perform the following steps as shown in the illustration:
a. Lift the latch [1].
b. Disconnect touchpad and power LED cables from the computer [2].
c. Remove the screws that secures palmrest assembly to the computer [3].
22
