Dell Latitude E7270 Owner'S Manual Download Page 49 | Manualshive

Page: 49 / 62

background image

Option

Description

Primary Battery
Charge
Configuration

Allows you to select the charging mode for the battery. The options are:

•

Adaptive

•

Standard — Fully charges your battery at a standard rate.

•

ExpressCharge — The battery charges over a shorter period of time using Dell’s fast charging

technology. This option is enabled by default.

•

Primarily AC use

•

Custom

If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.

NOTE: All charging mode may not be available for all the batteries. To enable this option, disable
the Advanced Battery Charge Configuration option.

POST Behavior screen options

Option

Description

Adapter Warnings

Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
Default setting: Enable Adapter Warnings

Keypad
(Embedded)

Allows you to choose one of two methods to enable the keypad that is embedded in the internal keyboard.

•

Fn Key Only: This option is enabled by default.

•

By Numlock

NOTE: When setup is running, this option has no effect. Setup works in Fn Key Only mode.

Mouse/Touchpad

Allows you to define how the system handles mouse and touch pad input. The options are:

•

Serial Mouse

•

PS2 Mouse

•

Touchpad/PS-2 Mouse: This option is enabled by default.

Numlock Enable

Allows you to enable the Numlock option when the computer boots.
Enable Network. This option is enabled by default.

Fn Key Emulation

Allows you to set the option where the Scroll Lock key is used to simulate the Fn key feature.
Enable Fn Key Emulation (default)

Fn Lock Options

Allows you to let hot key combinations Fn + Esc toggle the primary behavior of F1–F12, between their
standard and secondary functions. If you disable this option, you cannot toggle dynamically the primary
behavior of these keys. The available options are:

•

Fn Lock. This option is selected by default.

•

Lock Mode Disable/Standard

•

Lock Mode Enable/Secondary

MEBx Hotkey

Allows you to specify whether the MEBx Hotkey function should enable, during the system boot.

49

«
...
47
48
49
50
51
...
»

Summary of Contents for Latitude E7270































































Reviews:

No comments

Related manuals for Latitude E7270

Brand: Gateway Pages: 2

Brand: Gateway Pages: 188

Brand: Gateway Pages: 150

Toughbook CF-74CCB02BM

Brand: Panasonic Pages: 36

Brand: Gateway Pages: 52

Brand: Dell Pages: 7

Brand: Fujitsu Pages: 133

EasyNote MZ Series

Brand: Packard Bell Pages: 18

Brand: Packard Bell Pages: 202

Brand: Clevo Pages: 128

Brand: Clevo Pages: 83

Brand: Trust Pages: 2

Brand: StarTech.com Pages: 2

Brand: GIGA-BYTE TECHNOLOGY Pages: 12

Brand: Gigabyte Pages: 127

Brand: ViewSonic Pages: 2

Brand: Gateway Pages: 290

Brand: honor Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands