Dell Latitude E7270, Owner'S Manual

Page: 21 / 62

NOTE: Tighten the screws on the system board in the order of the callout numbers [1, 2, 3, 4].
3. Connect the fan cable to the connector on the system board.
4. Install the:
a.
battery
b. base cover
5. Follow the procedure in After working inside your computer .
Power connector port
Removing the power connector port
1. Follow the procedure in Before working inside your computer .
2. Remove the:
a.
base cover
b. battery
3. To remove the power connector port:
a. Unroute the display assembly cable.
b. Disconnect the power connector port cable from the system board [2].
c. Unroute the power connector port cable from the clip on the heat sink.
d. Remove the screw to release the metal bracket on the power connector port [3] .
e. Lift the metal bracket from the computer [4].
f. Remove the power connector port from the computer [5].
Installing the power connector port
1. Insert the power connector port into the slot on the computer.
2. Place the metal bracket on the power connector port and tighten the screw to secure the power connector port to the
computer.
3. Route the power connector port cable through the routing clip on the heat sink.
4. Connect the power connector port cable to the connector on the system board.
5. Route the display assembly cable to the computer.
6. Install the:
a.
battery
b. base cover
21