Figure 4. Removing the eDP cable for touch systems
Installing the eDP cable
1.
Route the display cable through the routing clips on the display assembly.
2.
Affix the camera cable adhesive and connect the camera cable.
3.
Connect the eDP cable to the connector on the display assembly.
4.
Install the:
a.
b.
NOTE: This is applicable only for non touch systems.
c.
d.
e.
5.
After working inside your system
.
Camera
Removing the camera
1.
Before working inside your computer
2.
Remove the:
a.
b.
c.
d.
NOTE: This is applicable only for non touch systems.
36