Installing the LED board
1. Insert the LED board into the slot on the computer.
2. Tighten the screw that secures the LED board to the computer.
3. Connect the LED board cable to the connector on the LED board.
4. Install the:
a.
b.
c.
d.
e.
f.
After working inside your computer
.
Heat sink
Removing the heat sink assembly
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
f.
3. To remove the heat sink:
a. Disconnect the fan cable [1].
b. Remove the screws that secure the heat sink assembly to the system board [2, 3, 4, 5, 6, 7].
c. Lift the heat sink assembly from the system board [8].
Disassembly and reassembly
29
