b. Disconnect the WWAN cables from the connectors on the WWAN card [2].
c. Unroute the WWAN cables from the routing channel.
d. Remove the WWAN card from the computer [3].
Installing the WWAN card
1. Insert the WWAN card into the slot on the computer.
2. Route the WWAN cables through the routing channel.
3. Connect the WWAN cables to the connectors on the WWAN card.
4. Tighten the screw to secure the WWAN card to the computer
5. Install the:
a.
b.
After working inside your computer
.
Docking frame
Removing the dock frame
Before working inside your computer
.
2. Remove the:
a.
b.
c.
d.
e.
3. To remove the dock frame connectors:
a. Remove the screws that secure the dock frame to the computer [1].
b. Remove the screw and lift the SSD plate from the computer [2, 3].
NOTE:
Step 3b is required only if the PCIe SSD card is removed.
c. Disconnect the keyboard cables [4, 5].
Disassembly and reassembly
19
