Back to Contents Page
System Board
Dell Latitude E4310 Service Manual
Removing the System Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
phone SIM
.
4.
Remove the
ExpressCard
.
5.
Remove the
SD memory card
.
6.
Remove the
hard drive assembly
.
7.
Remove the
hinge covers
.
8.
Remove the
mini card door
.
9.
Remove the
wireless local area network (WLAN) card
.
10.
Remove the
memory door
.
11.
Remove the
memory
.
12.
Remove the
coin-cell battery
.
13.
Remove the
optical drive
.
14.
Remove the
LED covers
.
15.
Remove the
keyboard
.
16.
Remove the
display assembly
.
17.
Remove the
palm rest
.
18.
Disconnect the smart card and speaker cables from the system board.
19.
Remove the screws that secure the system board to the chassis.
20.
Lift the right side of the system board to release it from the I/O board and the TAA board.
21.
Remove the system board from the computer.
Replacing the System Board
To replace the system board, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from
Adobe.com
in order to view the illustrations below.
NOTE:
Always replace the TAA board while replacing the system board.
