Dell Latitude E4310 Service Manual Download Page 20

Page: 20 / 44

Back to Contents Page

DC-In Connector

Dell Latitude E4310 Service Manual

Removing the Heat Sink and Processor Fan

Follow the procedures in

Before Working Inside Your Computer

Remove the

battery

Remove the

SIM

Remove the

ExpressCard

Remove the

SD memory card

Remove the

hard drive assembly

Remove the

hinge covers

Remove the

mini card door

Remove the

wireless local area network (WLAN) card

10.

Remove the

memory door

11.

Remove the

memory

12.

Remove the

coin-cell battery

13.

Remove the

optical drive

14.

Remove the

LED covers

15.

Remove the

keyboard

16.

Remove the

display assembly

17.

Remove the

palm rest

18.

Remove the

system board

19.

Disconnect the processor fan cable from the system board.

20.

Loosen the captive screws that secure the heat sink to the system board.

21.

Remove the heat sink and processor fan from the system board.

Replacing the Heat Sink and Processor Fan

To replace the heat sink and processor fan, perform the above steps in reverse order.

Back to Contents Page

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTE:

You may need to install Adobe Flash Player from

Adobe.com

in order to view the illustrations below.

Summary of Contents for Latitude E4310













































Search results

Summary of Contents for Latitude E4310

Reviews:

Related manuals for Latitude E4310

Brands by name

Popular brands

Dell Latitude E4310, Service Manual

Search results

Summary of Contents for Latitude E4310

Reviews:

Related manuals for Latitude E4310

Brands by name

Popular brands