Back to Contents Page
Keyboard
Dell™ Latitude™ D810 Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Turn the computer top-side up and open it.
3.
Remove the
center control cover
.
4.
Remove the keyboard:
a.
Remove the two M2.5 x 5-mm screws across the top of the keyboard.
b.
Lift the keyboard and slide it toward the back of the computer to disengage the tabs.
c.
Hold the keyboard up at an angle and slightly back to allow access to the keyboard connector.
d.
Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 display
2 center control cover
3 computer base
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
