Back to Contents Page
Microprocessor Thermal-Cooling Assembly
Dell™ Latitude™ D810 Service Manual
Removing the Microprocessor Thermal-Cooling Assembly
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
display assembly
.
3.
Remove the
keyboard
.
4.
Remove the
palm rest
.
5.
Loosen in consecutive order the four captive screws, labeled "1" through "4," that secure the microprocessor thermal-cooling assembly to the system
board.
6.
Lift the microprocessor thermal-cooling assembly straight up and remove it from the system board.
CAUTION:
Before performing the following procedures, read the safety instructions in your
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
1 captive screws (4)
2 microprocessor thermal-
cooling assembly
