20
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
'LVSOD\$VVHPEO\
)LJXUH'LVSOD\$VVHPEO\
5HPRYLQJWKH'LVSOD\$VVHPEO\
127,&(7RDYRLGGDPDJLQJWKHV\VWHPERDUG\RXPXVWUHPRYHWKH
PDLQEDWWHU\EHIRUH\RXVHUYLFHWKHFRPSXWHU
127,&('RQRWUHPRYHWKHSDOPUHVWEHIRUH\RXUHPRYHWKHGLVSOD\
1.
Remove the main battery and secondary battery (if present).
2. Remove the keyboard.
3. Close the display and remove the three 4-mm screws, labeled with a
“ circle D,” from the back of the computer (see Figure 13).
4. Open the display and disconnect the LCD flex cable from the connector on
the system board by pulling the connector straight up.
5. Lift the display assembly from the bottom case assembly. Pry the hinge
cover loose at the seam from the snap tabs on the bottom assembly (see
Figure 13).
NOTE: Always remove and replace the LCD panel as a complete assembly.
4-mm screws (3)
LCD flex cable
display assembly
bottom case assembly
hinge cover
M2.5x4
snap tab
snap tab
