support.dell.com
Dell Latitude CPt V/CPt S Series and CPx H/CPx J Series Service Manual
5
'LVFRQQHFWLQJ,QWHUIDFH&RQQHFWRUV
Some of the computer’s interface connectors are zero insertion force (ZIF)
connectors. These connectors are not removable, but they must be released
to disconnect the cable from them (see Figure 4).
)LJXUH'LVFRQQHFWLQJD&DEOHIURPDQ,QWHUIDFH&RQQHFWRU
127,&(7KH=,)LQWHUIDFHFRQQHFWRUVDUHIUDJLOH7RDYRLGGDPDJH
GRQRWDSSO\WRRPXFKSUHVVXUHWRWKHPRYDEOHSDUWRIWKHFRQQHFWRU
5HPRYLQJD&DEOHIURPD=,),QWHUIDFH&RQQHFWRU
1.
Insert a small flat-blade screwdriver behind the movable part of the
connector.
2. Push gently sideways on the movable part of the connector until it releases
the interface cable.
3. Grasp the interface cable and pull it out of the connector.
5HSODFLQJD&DEOHLQWRD=,),QWHUIDFH&RQQHFWRU
1.
Use a small flat-blade screwdriver to open the movable part of the ZIF
connector.
2. Orient the end of the interface cable with the ZIF connector, and insert the
end of the cable into the connector.
3. While holding the cable in place, close the ZIF connector.
To ensure a firm connection, make sure the ZIF connector is completely
closed.
movable part of
connector
(do not remove)
