Dell Latitude CPi A-Series User Manual Download Page 107

Page: 107 / 208

drivers.

Installing System Utilities

System utilities let you configure features such as the asset tag code and suspend-to-disk partition.

To copy the system utilities to your hard-disk drive, perform the following steps.

NOTE: You can also run the system utilities directly from the

System Utilities diskette.

1. Insert the

System Utilities

diskette into the diskette drive.

2. Copy each of the utilities on the

System Utilities

diskette to the

c:\dell

directory on your hard-disk

drive. The utilities have the following filenames:

mks2d.exe

rms2d.exe

asset.com

, and

readme.s2d.

For more information on copying files in Windows 95, see the documentation that came with the
operating system.

After you copy the utilities to your hard-disk drive, you must restart your computer in the MS-DOS

mode to

use the utilities.

See the

readme.s2d

file for more information on using the suspend-to-disk partition utilities. For more

information on using the asset tag utility, see your Dell system documentation.

Installing the Software Wavetable

The software wavetable allows you to customize certain audio features. To install the software wavetable,
perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the

end of this procedure to complete the installation.

2. Insert the first software wavetable diskette into the diskette drive.
3. Click the

Start

button, and then click

Run...

The

Run

dialog box appears.

4. Type

a:\setup

and then click

or press <Enter> to install the utility on your hard-disk drive.

5. Follow the instructions on your screen.
6. After the installation is complete, remove the final diskette from the diskette drive and restart your

computer to use the software wavetable.

Back to Contents Page

Summary of Contents for Latitude CPi A-Series

















































































































































































































Search results

Summary of Contents for Latitude CPi A-Series

Reviews:

Related manuals for Latitude CPi A-Series

Brands by name

Popular brands

Dell Latitude CPi A-Series, User Manual

Search results

Summary of Contents for Latitude CPi A-Series

Reviews:

Related manuals for Latitude CPi A-Series

Brands by name

Popular brands