Dell Latitude CPi A-Series User Manual Download Page 106

Page: 106 / 208

7. Follow the instructions on your screen, and when prompted, restart your computer to activate the utility.

Installing Audio Drivers

Dell provides audio drivers so you can customize the sound features of your computer.

To install the audio drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the

end of this procedure to complete the installation.

2. Insert the

audio driver diskette into the diskette drive.

3. Click the

Start

button, point to

Settings

, and then click

Control Panel

4. Double-click the

Multimedia

icon.

The

Multimedia Properties

dialog box appears.

5. Click the

Devices

tab.

6. Click

Add...

The

Add

dialog box appears, displaying a list of drivers.

7. Click the

Unlisted or Updated Driver

option, and then click

The

Install Driver

dialog box appears.

8. Verify that

A:\

is highlighted, and then click

The

Add Unlisted or Updated Driver

window appears.

9. Verify that the

NeoMagic MagicWare Audio Driver 256AV/3Dx Series Driver

is highlighted, and then

click

The

Audio

dialog box appears.

10. Click OK.
11. After installation is complete, restart your computer to activate the drivers.

Installing Touch Pad Drivers

Touch pad drivers and associated utilities allow you to use and customize the integrated touch pad or an
external mouse. To install the touch pad drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the

end of this procedure to complete the installation.

2. Insert the touch pad drivers

diskette into the diskette drive.

3. Click the

Start

button, and then click

Run...

The

Run

dialog box appears.

4. Type

a:\setup

, and then click

or press <Enter> to install the utility on your hard-disk drive.

5. Follow the instructions on your screen, and when prompted, restart the computer to activate the

Summary of Contents for Latitude CPi A-Series

















































































































































































































Search results

Summary of Contents for Latitude CPi A-Series

Reviews:

Related manuals for Latitude CPi A-Series

Brands by name

Popular brands

Dell Latitude CPi A-Series, User Manual

Search results

Summary of Contents for Latitude CPi A-Series

Reviews:

Related manuals for Latitude CPi A-Series

Brands by name

Popular brands