Installing battery
1
Insert the battery into the slot on the computer.
2
Connect the battery cable to the connector on the system board.
3
Replace the M 2 x 4L screws to secure the battery to the computer.
4
Install the:
a
b
5
Follow the procedure in
After working inside your computer
.
PCIe Solid State Drive (SSD)
Removing the NVMe SSD card
1
Follow the procedure in
Before working inside your computer
.
2
Remove:
a
b
c
NOTE:
You need not remove the battery, instead you can disconnect the battery cable from the system
board.
3
To remove the NVMe SSD card:
a Loosen the M2.0 x 3.0 screws that secure SSD thermal bracket [1].
b Lift the thermal bracket from the SSD card [2].
c Slide and remove the SSD card from the slot [3].
12
Removing and installing components
Summary of Contents for Latitude 7389
