b
c
3
To remove the LED board:
a Disconnect the LED cable from the LED board [1].
CAUTION:
Avoid pulling the cable as it would result in breaking the cable connector. Instead, use a scribe to push the
edges of the cable connector to release the LED cable.
b Remove the M2.0 x 3.0 screw that secures the LED board to the system [2].
c Lift the LED board from the system [3].
Installing LED board
1
Insert the LED board into the slot on the computer.
2
Replace the M2.0 x 3.0 screw to secure the LED board.
3
Connect the LED cable to the LED board.
4
Install the following:
a
b
c
5
Follow the procedure in
After working inside your computer
.
Removing and installing components
21
