b Lift the speaker module from the computer [2].
Installing speaker module
1
Place the speaker module into the slots on the system.
2
Replace the two (M2.0 x 3.0) screws to secure the speaker to the system.
3
Route the speaker cable through the retention clips on the system.
4
Connect the speaker cable to the connector on the system board.
5
Install the:
a
b
6
Follow the procedure in
After working inside your computer
.
Coin cell battery
Removing the coin cell battery
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the coin cell battery:
a Disconnect the coin cell battery cable from the connector on the system board [1].
NOTE:
You must un-route the coin cell battery cable from the routing channel.
b Lift the coin cell battery to release it from the adhesive [2].
Removing and installing components
15
