manualshive.com logo in svg

Dell Latitude 7290, Owner'S Manual

Share
Download
Dell Latitude 7290 Owner'S Manual Download Page 58

Option

Description

The options are:

•

Enable USB Boot Support—enabled by default

•

Enable External USB Port—enabled by default

NOTE: 

USB keyboard and mouse always work in the BIOS setup irrespective of these settings.

Dell Type-C Dock 
Configuration

Always Allow Dell Docs

.This option is enabled by default.

USB PowerShare

This field configures the USB PowerShare feature behavior. This option allows you to charge external devices using 
the stored system battery power through the USB PowerShare port. This option is disabled by default

Audio

This field enables or disables the integrated audio controller. By default, the 

Enable Audio

 option is selected. The 

options are:

•

Enable Microphone—by default enable

•

Enable Internal Speaker—by default enable

Keyboard 
Illumination

This field lets you choose the operating mode of the keyboard illumination feature. The keyboard brightness level 
can be set from 0% to 100%. The options are:

•

Disabled

•

Dim

•

Bright—enabled by default

Keyboard Backlight 
with AC

The Keyboard Backlight with AC option does not affect the main keyboard illumination feature. Keyboard 
Illumination will continue to support the various illumination levels. This field has an effect when the backlight is 
enabled. This option is enabled by default.

Keyboard Backlight 
Timeout on AC

The Keyboard Backlight Timeout dims out with AC option. The main keyboard illumination feature is not affected.

 

Keyboard Illumination will continue to support the various illumination levels. This field has an effect when the 
backlight is enabled. The options are:

•

5 sec

•

10 sec—enabled by default

•

15 sec

•

30 sec

•

1 min

•

5 min

•

15 min

•

Never

Keyboard Backlight 
Timeout on Battery

The Keyboard Backlight Timeout dims out with the Battery option. The main keyboard illumination feature is not 
affected. Keyboard Illumination will continue to support the various illumination levels. This field has an effect when 
the backlight is enabled. The options are:

•

5 sec

•

10 sec—enabled by default

•

15 sec

•

30 sec

•

1 min

•

5 min

•

15 min

58

System setup

Summary of Contents for Latitude 7290

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands