Dell Latitude 5591 Service Manual Download Page 41

Page: 41 / 64

Installing the system board

Align the system board with the screw holders on the laptop.

Tighten the M2x3 screws to secure the system board to the laptop.

Place the metal USB-C bracket and tighten the M2x5 screws on the system board.

Connect the LED, mother board and touchpad cable to the system board.

Connect the display cable on the system board.

Place the eDP cable and metal bracket to system board and tighten the M2x3 screws to secure to the system board.

Install the:

Follow the procedure in

After working inside your computer

Touchpad

Removing the touchpad

Follow the procedure in

Before working inside your computer

Remove the:

To release the touchpad panel:

a Lift the latch and disconnect the SmartCard reader cable from the connector on the system board [1].
b Peel off the SmartCard reader cable from the adhesive [2].

Disassembly and reassembly

Summary of Contents for Latitude 5591

































































Search results

Summary of Contents for Latitude 5591

Reviews:

Related manuals for Latitude 5591

Brands by name

Popular brands

Dell Latitude 5591, Service Manual

Search results

Summary of Contents for Latitude 5591

Reviews:

Related manuals for Latitude 5591

Brands by name

Popular brands