Installing the battery
NOTE:
68Whr battery can be used with either a M.2 or 7mm SATA drive.
1
Insert the battery into the slot on the laptop.
NOTE:
Route the battery cable below the battery routing channels to enable proper connection to the connector.
2
Connect the battery cable to the connector on the system board.
3
Tighten the M2.5x5 screw to secure the battery to the laptop.
4
Install the
.
5
Follow the procedure in
After working inside your computer
.
Solid State Drive — optional
Removing the M.2 Solid State Drive - SSD
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the SSD:
a Touch: Remove the one M2x3 screw [1] that secures the SSD bracket to the laptop and lift the SSD frame [2] that secures the
SSD card to the system board. .
Disassembly and reassembly
17
