Installing the heat sink for Non Touch
1
Place the heat sink on the system board and align the heat sink with the screw holders.
2
Tighten the M2x3 screws (4) to secure the heat sink to the system board.
NOTE:
Tighten the screws on the system board in the order of the callout numbers [1, 2, 3, 4].
3
Install the:
a
b
4
Follow the procedure in
After working inside your computer
.
Removing the heat sink assembly for Touch
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
a
b
3
To remove the heat sink assembly :
a Disconnect the heat sink assembly cable and remove the M2x3 screws (2) that secure the system fan on the system board [1,
2].
30
Disassembly and reassembly
