Dell Latitude 5490 Owner'S Manual Download

Page: 78 / 89

Option

Description

•

Enable Intel TurboBoost

Default setting: The option is enabled.

Hyper-Thread
Control

Allows you to enable or disable the Hyper-Threading in the processor.

•

Disabled

•

Enabled

Default setting: Enabled.

Power Management screen options

Option

Description

AC Behavior

Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected.
Default setting: Wake on AC is not selected.

Enable Intel Speed
Shift Technology

the option Enable Intel Speed Shift Technology option is enabled by default.

Auto On Time

Allows you to set the time at which the computer must turn on automatically. The options are:

•

Disabled

•

Every Day

•

Weekdays

•

Select Days

Default setting: Disabled

USB Wake Support

Allows you to enable USB devices to wake the system from Standby.

NOTE:

This feature is only functional when the AC power adapter is connected. If the AC power adapter

is removed during Standby, the system setup removes power from all the USB ports to conserve battery
power.

•

Enable USB Wake Support

•

Wake on Dell USB-C Dock

: This option is enabled by default.

Wireless Radio
Control

Allows you to enable or disable the feature that automatically switches from wired or wireless networks without
depending on the physical connection.

•

Control WLAN Radio

•

Control WWAN Radio

Default setting: The options are disabled.

Wake on LAN/
WLAN

Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a
LAN signal.

•

Disabled

•

LAN Only

•

WLAN Only

•

LAN or WLAN

System setup options

Summary of Contents for Latitude 5490


























































































Search results

Summary of Contents for Latitude 5490

Reviews:

Related manuals for Latitude 5490

Brands by name

Popular brands

Dell Latitude 5490, Owner'S Manual

Search results

Summary of Contents for Latitude 5490

Reviews:

Related manuals for Latitude 5490

Brands by name

Popular brands