manualshive.com logo in svg

Dell Latitude 5490, Owner'S Manual, Page: 75 / 89

Share
Download
Dell Latitude 5490 Owner'S Manual Download Page 75

Option

Description

System Password

Allows you to set, change or delete the system password.

NOTE: 

Successful password changes take effect immediately.

Default setting: Not set

Internal HDD-0 
Password

Allows you to set, change, or delete the Internal HDD-0 password.

NOTE: 

Successful password changes take effect immediately.

Default setting: Not set

Strong Password

Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.

NOTE: 

If Strong Password is enabled, Admin and System passwords must contain at least one uppercase 

character, one lowercase character and be at least 8 characters long.

Password 
Configuration

Allows you to determine the minimum and maximum length of Administrator and System passwords.

Password Bypass

Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they 
are set. The options are:

•

Disabled

•

Reboot bypass

Default setting: Disabled

Password Change

Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is 
set.
Default setting: 

Allow Non-Admin Password Changes

 is selected.

Non-Admin Setup 
Changes

Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set. 
If disabled the setup options are locked by the admin password. The option “Allow Wireless Switch changes" is 
disabled by default

UEFI Capsule 
Firmware Updates

Allows yout to control whether this system allows BIOS updates via UEFI capsule update packages.

•

Enable UEFI Capsule Firmware Updates

 (enabled by default)

TPM 2.0 Security

Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:

•

TPM On

: This option is enabled by default.

•

Clear

•

PPI Bypass for Enabled Commands

•

Attestation Enable

 (This option is enabled by default)

•

Key Storage Enable

 (This option is enabled by default)

•

PPI Bypass for Disable Commands

•

PPI Bypass for Clear Commands 

(This option is enabled by default)

•

SHA-256: This option is enabled by default.

•

Disabled

•

Enabled

 (This option is enabled by default)

System setup options

75

Summary of Contents for Latitude 5490


























































































Reviews:

No comments