c Remove the single M2x3 screw to release the power connector bracket that secures the power connector port to your system
[3].
d Remove the power connector bracket from the system [4].
e Pull the power connector port, and lift it away from the system [5].
Installing power connector port
1
Align the power connector port along the grooves on the slot and push it down.
2
Place the metal bracket on the power connector port.
3
Replace the single (M2x3) screw to secure the power connector bracket to the power connector port.
4
Connect the power connector cable to the connector on the system board.
5
Replace the screw that secures the display cable on the system board.
6
Install the :
a
b
7
Follow the procedure in
After working inside your computer
.
Chassis frame
Removing the chassis frame
1
Follow the procedure in
Before working inside your computer
.
2
Remove the:
Removing and installing components
29