Dell Latitude 5424 Rugged Service Manual Download Page 27

Page: 27 / 169

Table 6. Intel HD graphics 620 specification (continued)

Integrated Graphics Controller

Intel HD Graphics 620

Maximum Vertical Refresh Rate

Up to 85 Hz depending on resolution

Operating Systems Graphics/ Video API Support

Support for DirectX 12, OpenCL 2.0, OpenGL 4.3/4.4,
OpenGL ES

Supported Resolutions and Max Refresh Rates (Hz) (Note:
Analog and/or digital)

System ports: Max Digital: (HDMI) 2560x1600,
4096x2304@24 Hz

Docked:

●

Max Digital: ( DisplayPort 1.2) 3840 x2160 @60 Hz

●

Max Digital: (SL-DVI) 1920x1080 @60 Hz

●

Analog: (VGA) system (14 inch/15 inch) 2048x1152 @60
Hz

For 3 displays : up to max resolution each above

Numbers of Displays Supported

●

System Ports: 3 displays max with LCD plus 2 displays max
on each output (HDMI, USB Type-C)

●

Docked: 3 displays max (combo of LCD, VGA, DP, HDMI)

Intel UHD Graphics 620

Table 7. Intel UHD Graphics 620 (8th Generation Intel Core) specification

Integrated Graphics Controller

Intel UHD Graphics 620 (8th Generation Intel Core)

Bus Type

Internal PCIe

Memory Interface

N/A (unified memory architecture)

Graphics Level

GT2

Estimated Maximum Power Consumption (TDP)

15 W (included in the CPU power)

Display Support

On System:

HDMI 2.0

USB Type-C

Maximum Vertical Refresh Rate

Up to 85 Hz depending on resolution

Operating Systems Graphics/ Video API Support

DirectX 11 (Windows 7/8.1), DirectX 12 (Windows 10), OpenGL
4.3

Supported Resolutions and Max Refresh Rates (Hz) (Note:
Analog and/or digital)

System ports:

●

Max Digital: (HDMI) 4096x2304@24 Hz

●

Analog: (VGA) system (14 inches/15 inches) or docking
2048x1152 @60 Hz

Docked:

●

Max Digital: (DisplayPort 1.2) 3860 x2160 @60 Hz

●

Max Digital: (SL-DVI) 1920x1080 @60 Hz

●

Analog: (VGA) system (14 inches/15 inches) 2048x1152
@60 Hz

For 3 displays:

●

(native or docked) up to 1920x1200 max resolution each

Numbers of Displays Supported

●

System Ports - 3 displays max with LCD plus 1 display max
on each output (HDMI, VGA (14 inches/15 inches)

●

Docked - 3 displays max (combo of LCD, VGA, DP, HDMI)

Technology and components

Summary of Contents for Latitude 5424 Rugged










































































































































































Search results

Summary of Contents for Latitude 5424 Rugged

Reviews:

Related manuals for Latitude 5424 Rugged

Brands by name

Popular brands

Dell Latitude 5424 Rugged, Service Manual

Search results

Summary of Contents for Latitude 5424 Rugged

Reviews:

Related manuals for Latitude 5424 Rugged

Brands by name

Popular brands