manualshive.com logo in svg

Dell Latitude 5300 2-in-1 Chrome, Service Manual, Page: 102 / 121

Share
Download
Dell Latitude 5300 2-in-1 Chrome Service Manual Download Page 102

Step 1- Check for the Chrome OS is missing or damaged message

If you see this message, you can first try to perform a hard reset on your Chromebook by pressing R Power. If you still see this
message after performing a hard reset, please proceed to Step 2.

If you see the 

Chrome OS verification is turned off

 message, refer to 

Chrome OS verification is turned off

 section below.

Step 2- Create the recovery USB flash drive or SD card

Insert a USB flash drive or SD card into your computer and follow the instructions below

Table 11. USB flash drive or SD card

Operating System

Instructions

Chrome Device Instructions

Create a recovery flash drive by using the Image Burner. The tool
may not be available in all languages.

1. Type chrome://imageburner into the omnibox (browser's

address bar) .

2. Run the tool and follow the instructions that appear on your

screen.

NOTE:

 When recovering your Chromebook, make sure to

create the recovery flash drive on the same model.

Windows Instructions

1. Click the link 

https://dl.google.com/dl/chromeos/recovery/

chromeosimagecreatorV2.exe

 to download the Recovery Tool.

If you are a network administrator for your school, business, or
organization, click this link to download the Recovery Tool: 2. 3.

2. Run the tool and follow the instructions that appear on your

screen.

3. After you recover your Chromebook, you must format your

USB flash drive or SD card using the Recovery Tool. If you do
not format your USB flash drive or SD card, you will not be able
to use all the storage space on your external device.
Additionally, your USB flash drive or SD card may not be
recognizable by Windows.

Mac Instructions

Create a recovery flash drive by using the Recovery Tool. The tool
may not be available in all languages.

1. Click the link 

https://dl.google.com/dl/chromeos/recovery/

chromeosimagecreatorV2.exe

 to download the Recovery Tool.

2. Run the tool and follow the instructions that appear on your

screen.

After the process is complete, you might see an alert saying your
USB drive or SD card is unreadable. If this fails, try removing and
reinserting your USB drive or SD card. Your USB drive or SD card
should now be ready to use for recovery.

Linux Instructions

Create a recovery flash drive by using the Recovery Tool. The tool
may not be available in all languages.

1. 1.Click the link 

https://dl.google.com/dl/edgedl/chromeos/

recovery/linux_recovery.sh

 to download the Recovery Tool.

2. Modify the script permissions to allow execution with the

following command: 

$ & sudo chmod 755

linux_recovery.sh

3. Run the script with root privileges with the following

command:

$ sudo bash linux_recovery.sh

4. Follow the prompts from the tool to complete building the

operating system image.

102

Tõrkeotsing

Summary of Contents for Latitude 5300 2-in-1 Chrome


























































































































Reviews:

No comments