manualshive.com logo in svg

Dell Latitude 14 Rugged Extreme, Owner'S Manual

The Dell Latitude 14 Rugged Extreme is a high-performance laptop designed for durability in extreme conditions. For easy reference and guidance, be sure to download your free Owner's Manual from our website manualshive.com, where you can find a comprehensive manual for this rugged device.

Share
Download
background image

Table 10. Virtualization Support

Option

Description

Virtualization

Allows you to enable or disable the Intel Virtualization Technology.
Enable Intel Virtualization Technology (default)

VT for Direct I/O

Enables or disables the Virtual Machine Monitor (VMM) from utilizing the 
additional hardware capabilities provided by Intel® Virtualization 
technology for direct I/O.
Enable VT for Direct I/O — enabled by default.

Trusted Execution

This option specifies whether a Measured Virtual Machine Monitor 
(MVMM) can utilize the additional hardware capabilities provided by Intel 
Trusted Execution Technology. The TPM virtualization Technology, and 
Virtualization technology for direct I/O must be enabled to use this 
feature.
Trusted Execution — disabled by default.

Table 11. Wireless

Option

Description

Wireless Switch

Allows to set the wireless devices that can be controlled by the wireless 
switch. The options are:

• WWAN
• WLAN
• WiGig
• Bluetooth

All the options are enabled by default.

Wireless Device Enable

Allows you to enable or disable the internal wireless devices.
• WWAN
• WLAN/WiGig
• Bluetooth

All options are enabled by default.

Table 12. Maintenance

Option

Description

Service Tag

Displays the Service Tag of your computer.

Asset Tag

Allows you to create a system asset tag if an asset tag is not already set. 
This option is not set by default.

64

Summary of Contents for Latitude 14 Rugged Extreme







































































Reviews:

No comments

Related manuals for Latitude 14 Rugged Extreme

Everex StepNote XT Series Quick Setup Manual preview
StepNote XT Series
Brand: Everex Pages: 4
Acer TravelMate 2310 Manuel D'Utilisation preview
TravelMate 2310
Brand: Acer Pages: 63
Acer TRAVELMATE TravelMate 2350 Manual Do Utilizador preview
TRAVELMATE TravelMate 2350
Brand: Acer Pages: 88
Acer TravelMate 2310 Manual Do Utilizador preview
TravelMate 2310
Brand: Acer Pages: 65
Acer Travelmate 2300 Series Manual Do Utilizador preview
Travelmate 2300 Series
Brand: Acer Pages: 96
Acer TRAVELMATE TravelMate 2350 User Manual preview
TRAVELMATE TravelMate 2350
Brand: Acer Pages: 86
Acer Travelmate 2300 Series Manuel D'Utilisation preview
Travelmate 2300 Series
Brand: Acer Pages: 96
Acer TravelMate 2420 Guía Del Usuario preview
TravelMate 2420
Brand: Acer Pages: 78
Acer TravelMate 2420 Manual Do Utilizador preview
TravelMate 2420
Brand: Acer Pages: 78
Acer TravelMate 240 series User Manual preview
TravelMate 240 series
Brand: Acer Pages: 92
Acer TRAVELMATE TravelMate 2350 Manuel D'Utilisation preview
TRAVELMATE TravelMate 2350
Brand: Acer Pages: 86
Acer TravelMate 240 series Manual Do Utilizador preview
TravelMate 240 series
Brand: Acer Pages: 98
Acer TravelMate 2400 Manual Do Utilizador preview
TravelMate 2400
Brand: Acer Pages: 64
Acer Travelmate 2300 Series Guía Del Usuario preview
Travelmate 2300 Series
Brand: Acer Pages: 96
Philips SLE3400FN/10 Datasheet preview
SLE3400FN/10
Brand: Philips Pages: 1
Philips SDC5100 User Manual preview
SDC5100
Brand: Philips Pages: 7
Philips SNK5600 User Manual preview
SNK5600
Brand: Philips Pages: 51
Dell Inspiron 9300 Owner'S Manual preview
Inspiron 9300
Brand: Dell Pages: 132

Brands by name

Popular brands

Load more brands