4.
Perform the following steps to remove the display panel:
a. Disconnect the eDP cable from the display assembly. [1]
b. Disconnect the camera connector cables from the display assembly. [2][3]
c. Remove the display panel from the display assembly. [4]
Figure 36.
Installing the Display Panel
1.
Connect the eDP connector cable to the display assembly.
2.
Connect the camera cable connectors to the display assembly.
3.
Attach the display panel to the display assembly.
4.
Flip the display assembly over.
5.
Install the screws that secure the display panel to the display assembly.
6.
Install:
a.
battery
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Camera
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
display panel
51
