Installing the Hard Drive
1.
To secure the hard drive, push the hard drive into its compartment.
2.
Rotate the door back towards the computer and press until it is in a closed position.
NOTE: Ensure that the hard drive pull tab does not cover the water seal.
3.
Engage the lock by sliding it until the lock symbol is visible.
Removing the Bottom Cover
1.
Follow the procedures in
Before Working Inside your computer
2.
Remove the
battery
.
3.
Perform the following steps to remove the bottom cover:
a. Remove the screws that secure the bottom cover.
b. Lift the bottom cover and remove it from the computer.
Installing the Bottom Cover
1.
Place the bottom cover on the base of the computer.
2.
Install the screws that secure the bottom cover to the computer.
3.
Install the
battery
.
4.
Follow the procedures in
After Working Inside Your computer
.
14
