3.
Perform the following steps:
a. Remove the screws that secure the palmrest to the chassis. [1]
b. Flip the computer over in the direction indicated.
Figure 24.
4.
Perform the following steps :
a. Open the computer lid in the direction indicated. [1]
b. Pry the palmrest at the bottom side of the touch pad buttons to release it from the snaps.
c. Lift and remove the palmrest from the computer. [2]
Figure 25.
Installing the Palmrest
1.
Install the palmrest to it’s position on the computer until it snaps in place.
2.
Flip the computer over and install the screws that secure the palmrest to the chassis.
38
