manualshive.com logo in svg

Dell Inspiron One 19, Service Manual, Page: 53 / 65

Share
Download
Dell Inspiron One 19 Service Manual Download Page 53

Back to Contents Page

  

 

 Computer Stand  

Dell™ Inspiron™ One 19 Service Manual 

 

  

Removing the Computer Stand 

 

  

Replacing the Computer Stand 

 

 

 

 

 

 

 

Removing the Computer Stand  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Remove the I/O cover (see 

Removing the I/O Cover

).  

 

 

  

3.

Remove the four screws that secure the computer stand to the computer.  
 

 

  

4.

Lift the computer stand away from the computer.  
 

  

 

Replacing the Computer Stand  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Align the screw holes on the computer stand with the screw holes on the computer.  
 

 

  

3.

Replace the four screws that secure the computer stand to the computer.  
 

 

  

4.

Replace the I/O cover (see 

Replacing the I/O Cover

).  

 

 

 

 

 

5.

Connect your computer and all attached devices to electrical outlets, and turn them on.  
 

Back to Contents Page

 

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

screws (4) 

2 

computer stand 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron One 19


































































Reviews:

No comments