manualshive.com logo in svg

Dell Inspiron One 19, Service Manual, Page: 2 / 65

Share
Download
Dell Inspiron One 19 Service Manual Download Page 2

Back to Contents Page

  

 

 Decorative Cover  

Dell™ Inspiron™ One 19 Service Manual 

 

  

Removing the Decorative Cover 

 

  

Replacing the Decorative Cover 

 

 

 

 

 

 

 

Removing the Decorative Cover  

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Place the computer in an upright position.  
 

 

  

3.

Press and push out the locks to release the decorative cover.  
 

 

  

4.

Place the computer face up on a flat surface.  
 

 

  

5.

Lift the decorative cover away from the computer.  
 

  

  

 

Replacing the Decorative Cover  

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

1 

locks (2) 

1 

decorative cover 

Summary of Contents for Inspiron One 19


































































Reviews:

No comments