Dell Inspiron One 19 Service Manual Download Page 32 | Manualshive

Page: 32 / 65

Dell Inspiron One 19 Service Manual Download Page 32

Replacing the I/O Card

1.

Follow the procedures in

Before You Begin

.

2.

Align the screw holes on the I/O card with the screw holes on the I/O bracket. Replace the four screws that secure the I/O card to the I/O bracket.

3.

Replace the I/O bracket (see

Replacing the I/O Bracket

).

4.

Replace the back cover (see

Replacing the Back Cover

).

5.

Replace the display bezel (see

Replacing the Display Bezel

).

6.

Replace the speaker cover (see

Replacing the Speaker Cover

).

7.

Replace the decorative cover (see

Replacing the Decorative Cover

).

8.

Replace the optical drive (see

Replacing the Optical Drive

).

9.

Replace the computer stand (see

Replacing the Computer Stand

).

10.

Replace the I/O cover (see

Replacing the I/O Cover

).

11.

Connect your computer and all attached devices to electrical outlets, and turn them on.

Back to Contents Page

1

I/O card

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

«
...
30
31
32
33
34
...
»

Summary of Contents for Inspiron One 19


































































Reviews:

No comments