manualshive.com logo in svg

Dell Inspiron One 19, Service Manual, Page: 23 / 65

Share
Download
Dell Inspiron One 19 Service Manual Download Page 23

  

 

Replacing the Processor Heat Sink  

 

 

 

 

1.

Follow the procedures in 

Before You Begin

.  

 

 

  

2.

Clean the thermal grease from the bottom of the processor heat sink and reapply it.  
 

 

  

3.

Align the four captive screws on the processor heat sink with the screw holes on the system board and tighten the screws in ascending order.  
 

 

  

4.

Replace the system-board shield (see 

Replacing the System-Board Shield

).  

 

 

  

5.

Replace the inverter (see 

Replacing the Inverter

).  

 

 

  

6.

Replace the I/O bracket (see 

Replacing the I/O Bracket

).  

 

 

  

7.

Replace the back cover (see 

Replacing the Back Cover

).  

 

 

  

8.

Replace the display bezel (see 

Replacing the Display Bezel

).  

 

 

  

9.

Replace the speaker cover (see 

Replacing the Speaker Cover

).  

 

 

  

10.

Replace the decorative cover (see 

Replacing the Decorative Cover

).  

 

 

  

11.

Replace the optical drive (see 

Replacing the Optical Drive

).  

 

 

  

12.

Replace the computer stand (see 

Replacing the Computer Stand

).  

 

 

  

13.

Replace the I/O cover (see 

Replacing the I/O Cover

).  

 

 

 

 

 

14.

Connect your computer and all attached devices to electrical outlets, and turn them on.  
 

1 

captive screws (4) 

2 

processor heat sink 

 

CAUTION: 

Incorrect alignment of the processor heat sink can cause damage to the system board and processor.

 

NOTE: 

The original thermal grease can be reused if the original processor and processor heat sink are reinstalled together. If either the processor or 

the processor heat sink is replaced, use the thermal grease provided in the kit to ensure that thermal conductivity is achieved.

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron One 19


































































Reviews:

No comments