8.
Disconnect the microphone cable and AC adapter cable from the respective system board connectors.
9.
Remove the two screws that secure the system board to the computer base.
10.
Lift the system board at an angle towards the side of the computer and out of the computer base.
Replacing the System Board
1.
Remove the centrifugal paper of the thermal pads that shipped with your new system board and paste it on the processor, North Bridge, and South
Bridge.
2.
Follow all of the steps in
in reverse order.
3.
Turn on the computer.
4.
Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.
5.
Setting the Keyboard Matrix
1.
Turn off your computer (see
).
2.
If your computer is connected to the AC adapter, disconnect the AC adapter from the computer.
3.
Press and hold the following key combination for the desired keyboard matrix:-
¡
United States: <Fn><S>
¡
United Kingdom: <Fn><K>
¡
Japan: <Fn><J>
1 screw (2)
2 system board
3 microphone cable connector
4 AC adapter cable connector
NOTE:
The thermal pads may stick to the bottom of the palm rest. Remove the thermal pads from the bottom of the palm rest.
1
thermal pad (3)
2
south bridge
3
north bridge
4
processor
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
Summary of Contents for Inspiron Mini 9 910
Page 10: ...Back to Contents Page ...
Page 23: ......
