Removing the Mini-Card
1.
Follow the instructions in
.
2.
Remove the module cover (see
).
3.
Disconnect the antenna cables from the Mini-Card.
4.
Release the Mini-Card by removing the securing screws.
5.
Lift the Mini-Card out of its system board connector.
Replacing the Mini-Card
1.
Follow the instructions in
.
2.
Remove the new Mini-Card from its packing.
1
Mini-Card
2
securing screw (2)
3
antenna cable connector (2)
NOTICE:
When the Mini-Card is not in the computer, store it in protective antistatic packaging. See the information on protection against electrostatic
discharge in the safety information that shipped with your computer.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system board, and
realign the card.
NOTICE:
To avoid damage to the Mini-Card, never place cables under the card.
NOTICE:
Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
Summary of Contents for Inspiron Mini 9 910
Page 10: ...Back to Contents Page ...
Page 23: ......
