Microphone
Dell™ Inspiron™ 910 Service Manual
Removing the Microphone
1.
Follow the instructions in
.
2.
Remove the module cover (see
).
3.
Remove the keyboard (see
).
4.
Remove the palm rest (see
5.
Disconnect the microphone cable from the system board.
6.
Remove the microphone from the computer base.
Replacing the Microphone
1.
Insert the microphone in the slot and connect the microphone cable to the connector on the system board.
2.
Replace the palm rest (see
).
3.
Replace the keyboard (see
).
4.
5.
Slide the battery into the battery bay, until it clicks in place and slide the battery-lock latch towards the lock position.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
NOTE:
The analog microphone is not present if you have ordered the optional camera. Instead, you will have digital array microphones with the camera.
1
microphone
2
microphone cable connector
Summary of Contents for Inspiron Mini 9 910
Page 10: ...Back to Contents Page ...
Page 23: ......
