Dell Inspiron 8600 Owner'S Manual Download Page 122

Page: 122 / 174

122

Adding and Replacing Parts

www

.dell.com | support.dell.com

Connect the antenna cables to the Mini PCI.

Replace the cover and tighten the screw.

Adding a Modem

If you ordered the optional modem at the same time that you ordered your computer, Dell
installed the modem for you.

CAUTION: Before working inside your computer, read the safety instructions at

the front of this guide (see page 11).

NOTICE:

Handle components and cards by their edges, and avoid touching pins and contacts.

Ensure that the work surface is flat and clean to prevent scratching the computer

cover.

Save and close any open files, exit any open programs, and shut down the computer

(see page 42).

If the computer is docked, undock it.

Disconnect the computer from the electrical outlet.

Wait 10 to 20 seconds and then disconnect any attached devices.

Mini PCI card

antenna

cables (2)

Summary of Contents for Inspiron 8600















































































































































































Search results

Summary of Contents for Inspiron 8600

Reviews:

Related manuals for Inspiron 8600

Brands by name

Popular brands

Dell Inspiron 8600, Owner'S Manual

Search results

Summary of Contents for Inspiron 8600

Reviews:

Related manuals for Inspiron 8600

Brands by name

Popular brands